home *** CD-ROM | disk | FTP | other *** search
- Path: olympus.net!usenet
- From: dons@olympus.net (Don Schmelling)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CTX Multiscan Monitor
- Date: Sun, 31 Dec 95 11:55:02 PST
- Organization: Internet for the Olympic Peninsula
- Message-ID: <19951231.1197D20.A7FC@olympus.net>
- References: <820.6573T707T2161@teleplex.net>
- NNTP-Posting-Host: papm001.olympus.net
- X-Newsreader: TIN [AMIGA 1.3 950726BETA PL0]
-
- Mike Schaper (mschaper@teleplex.net) wrote:
- : Hi all,
- :
- : I have an Amiga 4000/040 with a CTX Multiscan monitor. I have had this
- : computer for around 2 years now and I run my workbench in DBLNTSC. I never
- : could get the monitor drivers to take up the full screen. I still have about
- : an inch on the right and inch on the left of a border. I was just wondering if
- : there is any way to get the full screen to be used. I have all the 3.1 monitor
- : drivers and I have tried all those patches and have even tried that moned
- : program. I was told when I originally bought my 4000 that better drivers would
- : be out to fix the problem but I still have the same problem.
- :
- : If you have any suggestions, then please email me at mschaper@teleplex.net.
- : Any help would be appreciated.
- :
- I have the CTX monitor as well. Just about the only time I see any weird
- boarders is when I run some games.
- I use Euro72 Productivity.
- You say you have 3.1. So have you used overscan prefs?
-
- ------------------------------------- -----------------------------------
- Don Schmelling Port Angeles, WA USA | "I smoked pot, but did not inhale."
- A1200/540/CD + A1230 50/50/8 | Slick Willie
- OMNIA EXTARES | Bill Clinton
- ------------------------------------- -----------------------------------
-